While remodelling your home, doing all the glass-related work yourself can be very tempting. You may believe you have the necessary skills to complete the task efficiently, but this is usually not true.
You might miss using a shim or forget about cladding lifts during your home renovation as an amateur. Thus, in your attempts to save a buck or two, you will end up with a shattered glass or a poorly installed glass structure.
To prevent this chaos, innovative machines like cladding lifts become necessary. Here are a few suggestions to keep up your sleeve while handling glass in renovations.
What You Should Do When Installing Glass
As you make changes to your home, you have the option to improve its style and design. Step away from the traditional designs of windows, doors, and other glass structures, and think of more creative and innovative ways.
Adding a different style of window or door can enhance the aesthetics and the value of your home. Since you have the chance, choose between energy-efficient windows, sliding doors, tinted glass, and so much more.
Careful on the Move
Moving glass is a game with high stakes. You need to plan accordingly and stick to the best results. For starters, make an exact routine to move the glass from the truck to the installation point. Check if you require cladding lifts to get into position.
Lay out wooden blocks in spots you think that the glass needs to be set down. Do not place the glass directly on the ground, and you can never be too careful while working with glass.
Add Dual- or Triple-pane Windows
The benefits of switching your regular glass windows for dual-pane or triple-pane windows are manifold. To begin with, these windows prevent the loss of heat. Usually, roughly 38-50% of heat is lost through single-pane windows and doors, resulting in higher utility bills.
If you live on a busy street, these windows can dampen noise and give your home a peaceful ambience. Combined with the noise-dampening effects and energy efficiency, you can sleep tight without worrying.
Handling With Care
The edges and sides of the glass are vulnerable spots that need special care. Especially while moving, these spots have the highest potential to crack and later shatter the glass. Avoiding impact is the only way to prevent damage to the material. If you notice any chips and cracks, do not ignore them.
While cleaning up, remember not to use highly abrasive cleaners. Most of the time, washing with regular dish soap and water does the job. Following this, you can use a soft cleaning cloth to buff it dry.
Try Not to DIY
While completing your home renovations alone can be an exciting project, working with glass can be tricky. If you lack prior experience in handling glass, leave it to the professionals,
You can always learn to do carpentry and glass installation, but starting with big jobs such as home renovations might yield unsatisfactory results. From injury to property damage, there are a lot of downsides to doing your glass installation.
Simply put, when you work with glass, you risk breaking it. Keeping this mantra in mind can help you understand how vulnerable the material is. Slow, thoughtful, and safe are the keywords for working with glass. If home improvement is your goal, better leave the glasswork to professionals.
Now that you know all, you must get the professionals to do the lifting. That way, your heart won’t break when your glass does.